HS650 CHROMIUM-CARBIDE OVERLAY PLATE
HS650 is a unique abrasion resistant chromium-carbide overlay on a mild steel base plate. It is designed for areas with moderate impact and severe abrasion. This plate can be cut, formed, or rolled. Our unique overlaying process produces a plate with a surface that is harder, tougher, and more wear resistant than plate made by any other process. HS650 can be formed or rolled.
HS650 is available in thicknesses from 3/8” to 1”
HS650 must be cut by plasma or abrasive water jet.
HS650 is available in thicknesses from 3/8” to 1”
HS650 must be cut by plasma or abrasive water jet.
Chemistry
|
Percent (%)
|
C
|
5.27
|
Mn
|
2.10
|
P
|
0.022
|
S
|
0.016
|
Si
|
0.50
|
Cr
|
26.1/30.0
|
Mechanical Properties:
Hardness
|
58 to 62 Rockwell C
|
Service Temperature
|
1000 degrees (F)
|
Welding Procedures:
HS650 is normally supplied with plasma cut edges and can be welded in place to carbon steel structures with a low hydrogen rod or wire such as E7018 or E8018. No preheating is required. It may be necessary to hardface over the weld with HS101HC wire for added protection.
Standard Sizes:
Standard plate size is 60” X 120.” HS650 can be cut to your specific needs. HS650 is available in single, double and triple pass applications in special thicknesses or on special bases upon request.
Standard thicknesses are:
| Nominal Thickness | Overlay Thickness | Base Plate Thickness | |
| 1/8 on 1/8 | 1/4" | 1/8" | 1/8" |
3/16 on 3/16
| 3/8" | 3/16" | 3/16" |
| 1/4 on 1/4 | 1/2" | 1/4" | 1/4" |
| 3/8 on 3/8 | 3/4" | 3/8" | 3/8" |
| 1/2 on 1/2 | 1" | 1/2" | 1/2" |
Suggested Uses for HARDSTEEL HS650 Wear Plate:
Bins & Hoppers
|
Blast Furnace Handling Equipment
| |
Blades
|
Blow Tank Plates
|
Buckets & Components
|
Bucket Lips
|
Chip Silo Components
|
Chipper Hoods & Components
|
Chutes
|
Conveyors & Liners
|
Crusher Components
|
Cyclones
|
Dozer Blade Liners
|
Debarking Drum Components
|
Drag Conveyors
|
Drums & Sprockets
|
Dust Collector Systems
|
Flights
|
Fan Blades & Housings
|
Flatback Elbows
|
Flume Liners
|
Hammer Mill Side Liners
|
Heel Pads
|
Haul Truck Bed Liners
|
Hooks
|
Hot & Cold Stip Mill Guides
|
Impact Plates
|
Liner Plates
|
Log Decks
|
Mine Cars & Equipment
|
Sand Systems
|
Scraper Blades
|
Screens
|
Shakeout Machines
|
Scrap Handling Equipment
|
Shot Blast Equipment
|
Skip Cars
|
Sprockets
|
Washers
|
Wear Plates
|