HARDOX PLATE DISTRIBUTOR 400,450,500,550,600 WEAR PLATE

Plate Hardox 400 Hardox 500

Plate Hardox 400 dan Hardox 500 ( kekerasan 380-420 HBW ) adalah baja keras sangat cocok untuk penggunaan jangka panjang di lingkungan abrasif dengan tekanan permukaan tinggi .Hardox diproduksi oleh SSAB Swedia produsen pelat AUS di seluruh dunia .

Pemotongan yang baik , lentur dan pengelasan sifat Hardox 400 & Hardox 500 , yang membuat lebih mudah dan proses yang lebih efisien . Hardox 400 & 500 tersedia yang mempercepat produksi Anda dan membuatnya lebih mudah dari sebelumnya .

Aplikasi dari Hardox Plates :

Pembuatan Kontainer

Bahan Dari Alat Berat

Bahan suku cadang untuk mesin pertambangan

Bahan suku cadang untuk pabrik pencampuran beton dan mesin pengolahan kayu

struktur Platform

pertambangan

Kandungan Kimia Besi (Chemcal Composition)

C;0.15 Si 0.7 Mn ;P ; 1.60. S;025 Cr0.01 Ni;0.3 Mo;0.25 B;0.25

Mecanical Properties Besi

Yield ; 1000

Tensile ; 1250

Elongation; 10

Degree; -40

Longitudinal; 45

DISTRIBUTOR PLATE OVERLAY PLATE HS650,HS650LT,HS650CC,HS650SS,HS750

HS650 CHROMIUM-CARBIDE OVERLAY PLATE

HS650 is a unique abrasion resistant chromium-carbide overlay on a mild steel base plate. It is designed for areas with moderate impact and severe abrasion.  This plate can be cut, formed, or rolled.  Our unique overlaying process produces a plate with a surface that is harder, tougher, and more wear resistant than plate made by any other process.  HS650 can be formed or rolled.

HS650 is available in thicknesses from 3/8” to 1”

HS650 must be cut by plasma or abrasive water jet.

Chemistry	Percent (%)
C	5.27
Mn	2.10
P	0.022
S	0.016
Si	0.50
Cr	26.1/30.0

Mechanical Properties:

Hardness	58 to 62 Rockwell C
Service Temperature	1000 degrees (F)

Welding Procedures:
HS650 is normally supplied with plasma cut edges and can be welded in place to carbon steel structures with a low hydrogen rod or wire such as E7018 or E8018. No preheating is required. It may be necessary to hardface over the weld with HS101HC wire for added protection.

Standard Sizes:
Standard plate size is 60” X 120.” HS650 can be cut to your specific needs. HS650 is available in single, double and triple pass applications in special thicknesses or on special bases upon request.

Standard thicknesses are:

	Nominal Thickness	Overlay Thickness	Base Plate Thickness
1/8 on 1/8	1/4"	1/8"	1/8"
3/16 on 3/16	3/8"	3/16"	3/16"
1/4 on 1/4	1/2"	1/4"	1/4"
3/8 on 3/8	3/4"	3/8"	3/8"
1/2 on 1/2	1"	1/2"	1/2"

Suggested Uses for HARDSTEEL HS650 Wear Plate:

Bins & Hoppers	Blast Furnace Handling Equipment
Blades	Blow Tank Plates	Buckets & Components
Bucket Lips	Chip Silo Components	Chipper Hoods & Components
Chutes	Conveyors & Liners	Crusher Components
Cyclones	Dozer Blade Liners	Debarking Drum Components
Drag Conveyors	Drums & Sprockets	Dust Collector Systems
Flights	Fan Blades & Housings	Flatback Elbows
Flume Liners	Hammer Mill Side Liners	Heel Pads
Haul Truck Bed Liners	Hooks	Hot & Cold Stip Mill Guides
Impact Plates	Liner Plates	Log Decks
Mine Cars & Equipment	Sand Systems	Scraper Blades
Screens	Shakeout Machines	Scrap Handling Equipment
Shot Blast Equipment	Skip Cars	Sprockets
Washers	Wear Plates

WEAR PLATE DISTRIBUTOR HS400,HS450,HS500

HS500 WEAR PLATE

Provides maximum wear resistance from impact and sliding. The fine grained, thru-hardened alloy steel chemistry makes this plate have the optimum hardness/toughness ratio. HS500 can be formed and machined.

HS500 is available in thicknesses from 1/8” to 4”

HS500 can be cut by gas, abrasive water jet, laser, or plasma.

Chemistry	%
C	.25/.31
Mn (Max)	0.95
P (Max)	0.025
S (Max)	0.005
Si	.45/.55
Ni (Max)	1.00
Mo (Max)	0.65
Cr (Max)	0.75
B	.0005/.005

Mechanical Properties:

Hardness	460 to 544 BHN
Yield Strength	175 to 200 ksi
Tensile Strength	230 to 270 ksi
Elongation	12%

Welding Procedures:
Preheating is recommended. E7018 or E8018 electrode rod or wire meeting AWS specifications.

Suggested Uses for HS500 Wear Plate:

Bark Hammers	Bins & Hoppers	Blast Furnace Handling Equipment
Blades	Blow Tank Plates	Buckets & Components
Bucket Lips	Chip Silo Components	Chipper Hoods & Components
Chutes	Conveyors & Liners	Crusher Components
Cyclones	Dozer Blade Liners	Debarking Drum Components
Downcomer Spout Liners	Drag Conveyors	Drums & Sprockets
Dust Collector Systems	Flights	Fan Blades & Housings
Flatback Elbows	Flume Liners	Hammers
Hell Pads	Hammer Mill Side Liners	Haul Truck Bed Liners
Hooks	Impact Plates	Liner Plates
Log Decks	Mine Cars & Equipment	Hot & Cold Strip Mill Guides
Pyrite Liners	Sand Systems	Scraper Blades
Screens	Screw Conveyors	Scrap Handling Equipment
Shakeout Machines	Shot Blast Equipment	Skip Cars
Skirtboard Liners	Sprockets	Transitions
Washers	Wear Plates